Author |
Message |
lumbering.buffalo
|
Post subject: Polish Plexiglass Posted: Tue Jun 02, 2009 10:04 am |
|
Joined: Sat Apr 29, 2006 6:08 pm Posts: 267
|
My company bought another that was going belly up. We inherited a whole bunch of flat screen monitors. One of the big ones got a 1" scratch on the face during the move.
Is there a product or a way to polish out the scratch. I have done the clean pencil eraser; good but not great. I followed up with vasaline to "fill in" the scratch. Better, but still not great.
So how about it; any suggestions?
|
|
|
|
|
ironbear
|
Post subject: Posted: Tue Jun 02, 2009 11:34 am |
|
Longtime Regular |
|
Joined: Tue Aug 16, 2005 1:08 pm Posts: 546 Location: Roseville
|
Well this might be a bit aggressive, but I bought a motorcycle once that the previous owner had applied Armor-All to the gauge faces and frosted the plastic. If I remember right, I used 800 grit to cut through the frosted layer, 1200 grit dry, then wet, to take out the marks. Then some buffing with polishing compound, followed by a two bottle plastic cleaning/polishing combo I got at a boat store, that was recommended for boat windows and motorcycle windscreens (can't remember the name off-hand).
Looked pretty good when I was done, not quite crystal clear, but I was getting tired of the whole process and probably didn't buff with polishing compound as long I could have.
_________________ You can't save the Earth unless you're willing to make other people sacrifice. ~Dogbert~
|
|
|
|
|
DeanC
|
Post subject: Posted: Tue Jun 02, 2009 11:42 am |
|
Longtime Regular |
|
Joined: Thu Mar 09, 2006 9:54 am Posts: 5270 Location: Minneapolis
|
One of these might do it:
_________________ I am defending myself... in favor of that!
|
|
|
|
|
Carbide Insert
|
Post subject: Posted: Tue Jun 02, 2009 11:50 am |
|
Poet Laureate |
|
Joined: Sat Aug 19, 2006 11:36 am Posts: 760 Location: Hutchinson, MN
|
The title of this thread had me thinking I was going to read a good Polish joke involving plexiglass. Alas, not the case.
_________________ It's not always easy these days to tell which of our two major political parties is the Stupid Party and which is the Evil Party...
But it remains true that from time to time they collaborate on something that's both stupid and evil and call it bipartisanship. -Thomas E. Woods Jr.
|
|
|
|
|
Andrew Rothman
|
Post subject: Re: Polish Plexiglass Posted: Tue Jun 02, 2009 12:41 pm |
|
Longtime Regular |
|
Joined: Sun Aug 07, 2005 10:24 am Posts: 6767 Location: Twin Cities
|
|
|
|
|
Binky .357
|
Post subject: Posted: Tue Jun 02, 2009 2:51 pm |
|
Longtime Regular |
|
Joined: Tue May 30, 2006 3:02 am Posts: 816 Location: South of the River Suburbs
|
Carbide Insert wrote: The title of this thread had me thinking I was going to read a good Polish joke involving plexiglass. Alas, not the case.
I thought it might be a thread about plywood or sheetmetal of something.
_________________ My YouTube Videos
"We're either gonna be the best of friends or there's gonna be a whole lotta shootin' goin' on."
"I think it's a good thing for serving cops to mix with non-cops in a situation where they understand that they aren't in charge." -JoelR
"You'd be amazed at the things a bullet can stop." -Old Irish Proverb
Last edited by Binky .357 on Wed Jun 03, 2009 8:28 am, edited 1 time in total.
|
|
|
|
|
SultanOfBrunei
|
Post subject: Posted: Tue Jun 02, 2009 3:22 pm |
|
Longtime Regular |
|
Joined: Wed Mar 12, 2008 3:13 pm Posts: 1743 Location: Lakeville
|
Most of the LCD monitors I sit in front of have a film-like top layer. If you have a hard plastic/plexi top layer it may be a semi-permenant protective cover that can be removed.
WikiHow says to use an exacto/razor to clean the rough edge of the scratch. Then use rubbing compound to clean it up a bit.
They also suggest filling the scratch lightly with vasoline, it is supposed to hide it.
|
|
|
|
|
Dee
|
Post subject: Posted: Tue Jun 02, 2009 5:49 pm |
|
Longtime Regular |
|
Joined: Fri Oct 31, 2008 11:39 pm Posts: 533 Location: Mankato Area
|
SultanOfBrunei wrote: Most of the LCD monitors I sit in front of have a film-like top layer. If you have a hard plastic/plexi top layer it may be a semi-permenant protective cover that can be removed.
.
If you do have a hard plastic laver over the front of the viewing area, you can use the following product.
Novus plastic Polish
It works great with Lexan or Plexiglass. If used according to the directions, scratches will totally disappear.
If you just have the traditional LCD silicone like film on the monitor, then you're probably SOL.
|
|
|
|
|
Mattxd
|
Post subject: Posted: Tue Jun 02, 2009 8:46 pm |
|
Senior Member |
|
Joined: Mon Oct 01, 2007 8:36 pm Posts: 129 Location: Elk River
|
question, dose the screen have a high gloss to it or is it a mat finish? the polishes may be able to help you but you will likely do more dammage then good.
The other suggestion I'd have would be to see if you can pop of the trim and replace the plastic I had to do this on the screen in a car a bought the previous owner must of cleaned the screen with a 3m pad
|
|
|
|
|
lumbering.buffalo
|
Post subject: Posted: Wed Jun 03, 2009 11:23 am |
|
Joined: Sat Apr 29, 2006 6:08 pm Posts: 267
|
Mat finish.
I am doing the vaseline trick now. Looking for a more permanent solution.
|
|
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
This is a static archive the Twin Cities Carry forum, maintained as a public service by the current forum of record, The Minnesota Carry Forum.
All times are UTC - 6 hours
Users browsing this forum: No registered users and 25 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum
|